Lock50 HW01 Now updated with Copy Key function from ISK and ID + Copy Key Function With RF support

03/01/2023
by Range Rover Land Rover Jaguar Spare Lost Key Replacement

Note Need to Use the Latest Online Version of Soft for these Functions

SW09 - SW09 - Write Change ID Keys using Unlocked Keys or via KVM 9S12XEP100 or RFA SPC560B60L3 MCU Dump on HW05 to HW12 Emulators with RF & Keyless

SW-09 Is a sofware licence that works with the LOCK 50 TAG PRO tool  this software will enable users to add and program new LandRover and Jaguar keys known as Change ID Keys and can be found here

The SW03 is Similar but with that you can only add Fixed ID Keys like in postion 3 or higher and must write back the Dump to the MCU for the older KVM with 9S12XEP100

Here simply load the files Eeprom and Dflash or copy from another unlocked keys data and be able to copy exisiting keys ID postion 1 or 2 or Both on to the Change ID Keys and can be found here

With the SW09 its now possible to use slots 1 and 2 and be able to emulate them with HW02 for Emergency start only or with the RKE Keyless Functions as normal HW05 to HW12 Emulator keys.

Use Aftermarket emulator keys like HW05 and HW06

Or You Can can Supply Original OEM Keys to clients when you use the  HW07 HW08 HW09 HW10      

Firstly you need to use other devices to read out the D-Flash and EEE data in the KVM or another have a unlocked key to read data from. Then use TagPro Key Programmer to generate new key and data on to your choosen Lock50 emulators &  finally write NO NEED TO back to KVM with SW09 as this does not add keys like the SW03 but only Emulates Exisitng Keys like the SW08 JLR BCM Module

Using Lock50 HW01 and our emulators that  emulate an existing key from the data you have extracted from an existing KVM or working key when the keys pcf is not locked

Note its posisble also to without having to retract the information again and to write a new Emulator Key send the key in the post if the client damaged or lost the one you supplied at time of programming.

The HW02 emulator would only allow you to start the car using the emulator below the steering wheel but with our New updated versions  of this emulator HW05 to HW12 which would allow you to start the car as normal using the remote and keyless function. 

Module Allows Write ID + Crypto to HW05 to HW12 Emulators From Dflash + Eeprom Files or Unlocked Keys where can read the ID and Crypto Data or From RFA with ST chips on bench with the HW04 Lock50 OBD Programmer and all without any soldering using the HW13 adapter or using the Dump from any RFA KVM from 2010 to  2023

Only Peps types Emergenncy start Only and need CCF Editing to Remove UWB before Keyless can work.

Rest non Peps and older type KVM type keys Full Function work without further programming.

HOT     Make a Direct Copy of any Unlocked key on to our HW05 to HW12 OEM Emulators with Remote Functions RKE PKE

 

 

 

 

 

 

 

 

 

Recent posts